Acacia Rough-Sawn Lumber, Thickness 30 mm (5/4"), Below 2C

We offer edged lumber in wholesale quantities: by the pallet and by the container.

Partnering with WoodWay Expert means:

• a wide selection of lumber products from our stock;
• material selection for projects of varying complexity;
• quality control inspection of lumber before shipment;
• supply stability.

Acacia Wood: Characteristics

Acacia is a hardwood species. Its strong wood, featuring a distinct texture and a pleasant warm color palette, is a popular material among furniture makers, carpenters, and designers.

Physical and Mechanical Properties of Acacia

• The average density of dry acacia wood is approximately 750-800 kg/m³. This gives the material significant weight and high resistance to mechanical damage. On the Janka hardness scale, acacia’s rating varies between 1700-1750 lbf. According to the Brinell classification, its hardness is 7.1.
• Its considerable toughness prevents the wood from splitting under load and during drilling. Acacia has high density, making it less flexible than some other species.

Aesthetic Parameters of Acacia Wood

• The sapwood has a creamy or light-yellow hue. The heartwood is distinguished by a rich yellow-brown, sometimes olive, color. The species darkens over time.
• The wood has a pronounced grain and a silky luster on the surface. The fibers are usually straight, but sometimes a wavy or interlocked structure occurs. Small knots are occasionally present, highlighting the material’s natural beauty.

Processing Characteristics

• This hard, dense, and tough wood requires the use of sharp tools. Care must be taken during planing and milling to avoid chipping. Acacia glues, sands, and polishes well.
• The solid wood readily absorbs stains, varnishes, and oils, which allows for enhancing its natural color and unique texture.

Characteristics of Grade 2 Edged Acacia Lumber

Grade 2 edged lumber is a strong and stable product that has visual characteristics distinguishing it from higher grades.

Key characteristics of Grade 2 edged boards:

• Dry, loose knots up to 5 mm in diameter are permissible. The number of knots per linear meter is not strictly regulated. However, they should not be located close to each other or to the edges of the board, so as not to reduce the strength of the lumber.
• Surface cracks up to 100 mm (3.94″) in length that do not affect the structural integrity of the board may be present.
• Noticeable color variations between different areas are allowed.

What is Edged Acacia Lumber?

An edged board is a piece of lumber from which the bark and wane have been removed from the side edges. High-quality logs are selected for producing edged lumber. The raw material is sawn into boards, taking into account the grain direction and the required thickness and length. Then, the blanks go through machines where the remaining bark is removed and straight edges are formed. The wood’s moisture content is brought to an optimal 8-12% in drying kilns. The dry joinery boards are then sorted by grade, assessing color, grain structure, number and type of knots, and other factors.

How Does Kiln Drying Work?

Our in-stock program features kiln-dried edged boards. Kiln drying of wood is a high-tech and controlled process. Unlike air drying, this method is significantly faster and guarantees a stable and uniformly dried material with an optimal joinery moisture content of 8-12%.

The main stages of drying wood in special kilns:

1. Loading the Lumber. The boards are stacked in special drying kilns. Gaps are left between the rows to allow for free air circulation.
2. Preparation (Steaming). In the initial stage, the wood may be treated with steam. This procedure is mainly used for hardwoods, such as oak or beech. Steam treatment opens the pores and equalizes moisture, reducing the risk of cracks and internal stresses.
3. Main Drying. The kilns are equipped with a heating and ventilation system. The temperature and humidity of the air inside the kiln are computer-controlled and changed according to a set program depending on the wood species, board thickness, and initial moisture level.
4. Monitoring. Moisture meters and sensors constantly monitor the condition of the wood. Drying continues until the material reaches the optimal working moisture content of 8–12%.
5. Final Conditioning and Cooling. To relieve internal stresses, the dried lumber is treated with steam. Then, the boards are gradually cooled to a temperature close to the ambient environment (approximately 35–45 °C) to avoid condensation.

Kiln-dried edged boards are ideally suited for the production of furniture, doors, and other interior elements. Wood at joinery moisture content is stable, strong, and ready for further processing.

Advantages of Edged Acacia Lumber

1. Versatility of Application. The material is suitable for both mass production of furniture and individual craft projects.
2. Stability. Thanks to kiln drying, the result is uniformly dried and stable solid boards, ready for further mechanical processing.
3. Waste Reduction and Economic Benefit. High-quality primary processing of the lumber reduces the amount of waste and increases the raw material utilization rate. This means you pay only for the usable volume of material, which is especially important in mass production.
4. Optimization of Production Processes. Lumber with pre-processed side edges reduces cutting time and optimizes production processes. Edged boards are easy to plane, mill, sand, stain, varnish, and paint.
5. Convenience of Logistics and Storage. Thanks to their regular shape, the boards are easy to stack, which saves warehouse space, simplifies transportation, and reduces logistics costs.

Applications of Edged Acacia Lumber

Edged lumber is one of the most popular materials in the woodworking industry. Below are the areas where this natural material is actively used.

Furniture Manufacturing

Edged boards are used in the production of cabinets and facades for wardrobes, dressers, and nightstands, as well as tables, chairs, beds, ottomans, and benches. Wooden furniture can be stained to logically fit into various design project styles.

Construction and Finishing

This lumber product is used as both a structural and finishing material. The boards are used to create decking, flooring (parquet, parquet boards, and tongue-and-groove boards), wall panels, non-load-bearing walls, and interior stairs.

Production of Doors and Windows

Thanks to its stability and ease of processing, edged lumber is used in the manufacture of interior doors, window frames, casings, and windowsills.

Craft and Design Projects

For workshops that create unique products, edged lumber opens up wide possibilities. Carpenters produce custom-made exclusive furniture, interior panels, room dividers and screens, and a variety of interior decor.

FAQ: Frequently Asked Questions

What species of edged boards are available for order?

We have boards from over 10 species available for order. Hardwoods: European Oak, Red Oak, Ash, Alder, European Walnut, Acacia, Beech, Hornbeam, Elm, Maple, Cherry. Softwoods: Pine, Spruce.

What is the minimum order?

The minimum order for lumber is 1 container.

What are the delivery times?

Lumber delivery times depend on the volume of the shipment and the destination. Estimated delivery time is 4-8 weeks.

How are the boards packaged for transportation?

The edged boards are hermetically sealed in film for safe sea transport.

What is an edged board and how does it differ from an unedged one?

The bark and wane have been removed from the side edges of an edged board. An unedged board, in contrast, retains its natural edge.

What is considered the optimal moisture content for joinery lumber?

For woodworking, particularly furniture manufacturing, the moisture content of the boards should be within the 8–12% range.

What sizes of edged boards are available in stock?

We have lumber with the following parameters in stock:

• thickness: 30 mm, 50 mm / 1.18″, 1.97″;
• width: from 20 cm / from 7.87″;
• length: 2.2-4.5 m / 86.61″-177.2″.

How should edged lumber be stored correctly?

Lumber should be stored in a dry, ventilated room with a stable temperature and humidity level.

Can edged lumber be used for exterior work?

Yes, hardwoods are used for exterior work. The wood must be treated with antiseptics and special protective coatings.

What are the grades of edged lumber?

Edged lumber is classified into three main grades:

• Grade 1. Practically free of knots, with uniform texture and color.
• Grade 2. Allows knots up to 5 mm in diameter, minor surface cracks, and color variations.
• Grade 3. A large number of knots, surface and through cracks, and uneven coloring.

What is kiln drying and why is it important?

Kiln drying of wood is a controlled process during which the material is dried to an optimal moisture content (8-12%) in special chambers. This drying method ensures the stability and durability of the board.