Elm Rough-Sawn Lumber, Thickness 30 mm (5/4"), Below 2C

We offer edged lumber in wholesale quantities: by the pallet and by the container.

Partnering with WoodWay Expert means:

• A wide selection of lumber products from our in-stock inventory;
• Material selection for projects of varying complexity;
• Quality control inspection of lumber before shipment;
• Supply stability.

Elm Wood: Characteristics

Elm (Ulmus) is a valuable hardwood species that has gained recognition in the U.S. market due to its combination of strength, aesthetic qualities, and workability. Thanks to its balanced physical and mechanical properties, this wood is an excellent choice for furniture makers, carpenters, and designers.

Technical Parameters of Elm Wood

• The average density of the dry wood is approximately 650 kg/m³. This gives the material sufficient weight and strength for manufacturing durable structures.
• According to the Janka hardness scale, elm’s rating is approximately 810 lbf. On the Brinell scale, its hardness is 3.4–3.7. These parameters indicate moderate resistance to dents and damage.
• Elm is a tough and elastic wood, making it resistant to splitting even under strong impact loads. The wood is bendable after steam treatment.

Aesthetic Characteristics of Elm

• The sapwood is light yellow or pale gray. The heartwood palette consists of warm light brown, sometimes reddish-brown, tones.
• Elm has a medium texture. The grain is often interlocked, forming a characteristic wavy pattern. The wood surface has a natural silky luster.

Workability

• Due to its toughness, the wood is easy to cut and work with both hand and power tools. Because of the interlocked grain, extra care may be needed during planing and milling to achieve a perfectly smooth surface.
• Elm sands and polishes well, glues easily, and absorbs stains, varnishes, and oils, allowing craftsmen to achieve desired shades and enhance the texture.

Characteristics of Grade 2 Edged Elm Lumber

Grade 2 edged lumber is a strong and stable product that has visual characteristics distinguishing it from higher grades.

Key characteristics of Grade 2 edged boards:

• Dry, loose knots up to 5 mm in diameter are permitted. The number of knots per linear meter is not strictly regulated. However, they should not be located close to each other or to the edges of the board, so as not to reduce the lumber’s strength.
• Surface checks up to 100 mm (3.94″) in length that do not affect the board’s structural integrity may be present.
• Noticeable color variations between different areas are allowed.

What is Edged Elm Lumber?

An edged board is lumber from which the bark and wane have been removed from the side edges. High-quality logs are selected for the production of edged lumber. The raw material is sawn into boards, considering the grain direction and the required thickness and length. Then, the blanks go through machines where residual bark is removed and straight edges are formed. The wood’s moisture content is brought to an optimal level of 8-12% in drying kilns. The dry joinery boards are then sorted by grade, assessing color, grain structure, and the quantity and type of knots.

How Does Kiln Drying of Boards Work?

Our in-stock selection includes kiln-dried edged lumber. Kiln drying of wood is a high-tech and controlled process. Unlike air drying, this method is significantly faster and guarantees stable and uniformly dried material with an optimal joinery moisture content of 8-12%.

The main stages of drying wood in special kilns:

1. Loading the Lumber. Boards are stacked in special drying kilns. Spaces are left between the rows to allow for free air circulation.
2. Preparation (Steaming). In the initial stage, the wood may be treated with steam. This procedure is mainly used for hardwoods, such as oak or beech. Steam treatment opens the pores and equalizes moisture, reducing the risk of cracks and internal stresses.
3. Main Drying. The kilns are equipped with a heating and ventilation system. The temperature and humidity inside the kiln are controlled by a computer and changed according to a set program depending on the wood species, board thickness, and initial moisture level.
4. Monitoring. Moisture meters and sensors constantly track the condition of the wood. Drying continues until the material reaches the optimal working moisture content of 8–12%.
5. Final Conditioning and Cooling. To relieve internal stresses, the dried lumber is treated with steam. Then, the boards are gradually cooled to a temperature close to the ambient environment (approximately 35–45 °C) to avoid condensation.

Kiln-dried edged boards are ideally suited for the production of furniture, doors, and other interior elements. Wood at joinery moisture content is stable, strong, and ready for further processing.

Advantages of Edged Elm Lumber

1. Versatility. The material is suitable for both mass production of furniture and individual craft projects.
2. Stability. Kiln drying results in uniformly dried and stable solid boards, ready for further mechanical processing.
3. Reduced Waste and Cost-Effectiveness. High-quality primary processing of the lumber reduces the amount of waste and increases the raw material utilization rate. This means you only pay for the usable volume of material, which is especially important in mass production.
4. Optimization of Production Processes. Lumber with pre-processed side edges reduces cutting time and optimizes manufacturing processes. Edged boards are easily planed, milled, sanded, stained, varnished, and painted.
5. Convenient Logistics and Storage. Thanks to their regular shape, the boards are easy to stack, which saves warehouse space, simplifies transportation, and reduces logistics costs.

Applications of Edged Elm Lumber

Edged lumber is one of the most popular materials in the woodworking industry. Below are the areas where this natural material is actively used.

Furniture Manufacturing

Edged lumber is used in the manufacturing of frames and fronts for cabinets, dressers, and nightstands, as well as tables, chairs, beds, ottomans, and benches. Wooden furniture can be stained to logically fit into various design styles.

Construction and Finishing

This lumber product is used as both a structural and finishing material. It is used to create subfloors, flooring (hardwood, engineered, and tongue-and-groove boards), wall panels, non-load-bearing walls, and interior stairs.

Door and Window Manufacturing

Thanks to its stability and ease of processing, edged lumber is used in the manufacturing of interior doors, window frames, casings, and sills.

Craft and Designer Projects

For workshops that create unique products, edged lumber opens up wide possibilities. Carpenters produce custom-made exclusive furniture, interior panels, room dividers and screens, and a variety of interior decor.

FAQ: Frequently Asked Questions

What wood species are available for order?

You can order boards from over 10 species. Hardwoods: European Oak, Red Oak, Ash, Alder, European Walnut, Acacia, Beech, Hornbeam, Elm, Maple, Cherry. Softwoods: Pine, Spruce (Fir).

What is the minimum order?

The minimum order for lumber is 1 container.

What are the lead times for an order?

Lumber delivery times depend on the supply volume and destination. Estimated lead times are 4-8 weeks.

How are the boards packaged for transport?

The edged boards are hermetically sealed in film for safe sea transport.

What is an edged board and how does it differ from an unedged one?

An edged board has had the bark and wane removed from its side edges. An unedged board, in contrast, retains its natural edge.

What moisture content is considered optimal for joinery lumber?

For woodworking, especially furniture manufacturing, the moisture content of boards should be within the 8–12% range.

What sizes of edged boards are available in stock?

We have lumber with the following parameters in stock:

• Thickness: 30 mm, 50 mm / 1.18″, 1.97″;
• Width: from 20 cm / from 7.87″;
• Length: 2.2-4.5 m / 86.61″-177.2″.

How should edged lumber be stored correctly?

Lumber should be stored in a dry, ventilated room with a stable temperature and humidity level.

Can edged lumber be used for exterior work?

Yes, hardwoods are used for exterior projects. The wood must be treated with antiseptics and special protective coatings.

What are the grades of edged lumber?

Edged lumber is classified into three main grades:

• Grade 1. Practically free of knots, with uniform texture and color.
• Grade 2. Allows knots up to 5 mm in diameter, minor surface checks, and color variations.
• Grade 3. A large number of knots, surface and through-cracks, and uneven coloring.

What is kiln drying of wood and why is it important?

Kiln drying of wood is a controlled process where the material is dried to an optimal moisture content (8-12%) in special chambers. This drying method ensures the stability and durability of the board.